Sorption capacity of polymer based on carboxymethylcellulose and glycidylacrylate towards metal ions

封面

如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅或者付费存取

详细

The sorption ability of the synthesized polymer based on carboxymethylcellulose and glycidylacrylate towards Cu2+, Ni2+, Fe2+, Mn2+ ions has been studied. It has been shown that the sorption of metal ions is reliably described by the Langmuir model, and the process itself has a physical character. By the method of thermogravimetric analysis it has been established that the process of thermodegradation of the polymer occurs in three steps, and of its complex with copper – ​in four steps. The activation energy of decomposition of the initial polymer for each step is in the range of 29–57 kJ/mol, and for its complex with copper – ​58–120 kJ/mol. The introduction of Cu(II) increases the thermostability of the obtained polymer based on carboxymethylcellulose.

作者简介

V. Lipin

Graduate School of Technology and Energy, St. Petersburg State University of Industrial Technologies and Design

St. Petersburg, Russia

A. Evdokimov

Graduate School of Technology and Energy, St. Petersburg State University of Industrial Technologies and Design

St. Petersburg, Russia

Ya. Petrova

Graduate School of Technology and Energy, St. Petersburg State University of Industrial Technologies and Design

Email: yulia.petrova1997@yandex.ru
St. Petersburg, Russia

D. Hernandez Garcia

Graduate School of Technology and Energy, St. Petersburg State University of Industrial Technologies and Design

St. Petersburg, Russia

I. Krasanov

St. Petersburg State Maritime Technical University

St. Petersburg, Russia

A. Dmitrieva

St. Petersburg State Maritime Technical University

St. Petersburg, Russia

V. Sitnikova

ITMO National Research University

St. Petersburg, Russia

参考

  1. van der Perk M. // Soil and Water Contamination (2nd ed.). London: CRC Press, 2017. 428 р.
  2. Tamez C., Hernandez R., Parsons. J.G. // Microchem. J. 2016. V. 125. P. 97. https://doi.org/10.1016/j.microc.2015.10.028
  3. Ntimbani R.N., Simate G.S., Ndlovu S. // J. Environ. Chem. Eng. 2015. V. 3. № 2. P. 1258. https://doi.org/10.1016/j.jece.2015.02.010
  4. Martin-Lara M.A., Blazquez G., Calero M. et al. // Int. J. Miner. Process. 2016. V. 148. P. 72. https://doi.org/10.1016/j.minpro.2016.01.017
  5. Ayala-Cabrera J.F., Trujillo-Rodriguez M.J., Pino V. et al. // Int. J. Environ. Anal. Chem. 2016. V. 96. № 2. P. 101. https://doi.org/10.1080/03067319.2015.1128538
  6. Xu Z., Gao G., Pan B. et al. // Water Res. 2015. V. 87. P. 378. https://doi.org/10.1016/j.watres.2015.09.025
  7. Bojic A.L., Bojic D., Andjelkovic T. // J. Hazard. Mater. 2009. V. 168. № 2. P. 813. https://doi.org/10.1016/j.jhazmat.2009.02.096
  8. Duan L., Hu N., Wang T. et al. // Chem. Eng. Commun. 2016. V. 203. № 1. P. 28. https://doi.org/10.1080/00986445.2014.956735
  9. Bailey S.E., Olin T.J., Bricka R.M., Adrian D.D. // Water Res. V. 33. № 11. P. 2469. https://doi.org/10.1016/s0043-1354(98)00475-8
  10. Altinisik A., Yurdakoc K. // Water Treat. 2015. V. 2. P. 994. https://doi.org/10.1080/19443994.20151091
  11. Rao G.P., Lu C., Su F. // Sep. Purif. Technol. 2007. V. 58. P. 224. https://doi.org/10.1016/j.seppur.2006.12.006
  12. Hu K., Wang K., Liu J., Dong Q. // Desalin. Water Treat. 2016. V. 57. № 10. P. 4606. https://doi.org/10.1080/19443994.2014.1001442
  13. Pawar R.R., Lalhmunsiama A., Bajaj H., Lee S.-M. // J. Ind. Eng. Chem. 2016. V. 34. P. 213. https://doi.org/10.1016/j.jiec.2015.11.014
  14. Sharma N., Tiwari A. // Desalin. Water Treat. 2016. V. 57. № 10. P. 4523. https://doi.org/10.1080/19443994.2014.991945
  15. Cheung W., Ng J., Mckay G. // J. Chem. Technol. Biotechnol. 2003. V. 78. P. 562. https://doi.org/10.1002/jctb.836
  16. Alshahateet S.F., Jiries A.G., Al-Trawneh S.A. et al. // Desalin. Water Treat. 2016. V. 57. № 10. P. 4512. https://doi.org/10.1080/19443994.2014.991762
  17. Neagu V., Mikhalovsky. S. // J. Hazard. Mater. 2010. V. 183. № 1. P. 533. https://doi.org/10.1016/j.jhazmat.2010.07.057J
  18. Rutkowska J., Kilian K., Pyrzynska K. // Eur. Polym. J. 2008. V. 44. № 7. P. 2108. https://doi.org/10.1016/j.eurpolymj.2008.04.009
  19. Uguzdogan E., Denkbaş E.B., Kabasakal O.S. // J. Hazard. Mater. 2010. V. 177. № 1. P. 119. https://doi.org/10.1016/j.jhazmat.2009.12.004
  20. El-Sakhawy M., Kamel S., Salama A., Sarhan H.-A. // J. Drug. Deliv. 2014. V. 2014. Article ID575969. https://doi.org/10.1155/2014/575969
  21. Lawniczak J.E., Posey-Dowty J., Seo K.S., Walker K. // Paint Coat. Ind. 2003. V. 19. № 6. P. 28.
  22. Posey-Dowty J.D., Seo K.S., Walker K.R., Wilson A.K. // Surf. Coat. Int. Part B: Coat. Trans. 2002. V. 85. № 3. P. 203. https://doi.org/10.1007/BF02699510
  23. McCreight K.W., Webster D.C., Kemp L.K. Patent US20050203278 A1 (2005).
  24. Shelton M.C., Wilson A.K., Posey-Dowty J.D. et al. Patent EP 1603953 (2007).
  25. Elwakeel K.Z., Rekaby M. // J. Hazard. Mater. 2011. V. 188. № 1–3. P. 10. https://doi.org/10.1016/j.jhazmat.2011.01.003
  26. Sandic Z.P., Nastasovic A.B., Jovic-Jovicic N.P. et al. // J. Appl. Polym. Sci. 2011. V. 121. № 1. P. 234. https://doi.org/10.1002/app.33537
  27. Chen C., Chiang C., Chen C.R. // Sep. Purif. Technol. 2007. V. 54. № 3. P. 396. https://doi.org/10.1016/j.seppur.2006.10.020
  28. Liu C., Bai R., Hong L., Liu T. // J. Colloid. Interface Sci. 2010. V. 345. № 2. P. 454. https://doi.org/10.1016/j.jcis.2010.01.057
  29. Евдокимов А.Н., Курзин А.В., Липин В.А. и др. // Бутлеровские сообщения. 2023. Т. 76. № 12. C. 167. https://doi.org/10.37952/ROI-jbc-01/23-76-12-167
  30. Филиппов Д.В., Фуфаева В.А., Шепелев М.В. // Журн. неорган. химии. 2022. Т. 67. № 3. С. 397. https://doi.org/10.31857/S0044457X22030084 [Filippov D.V., Fufaeva V.A., Shepelev M.V. // Russ. J. Inorg. Chem. 2022. V. 67. № 3. Р. 375. https://doi.org/10.1134/S0036023622030081]
  31. Farah A., Razak A.S., Zularisam A.W. et al. // Cleaner Waste Systems. 2022. V. 3. Article ID100051. https://doi.org/10.1016/j.clwas.2022.100051
  32. Itodo A.U., Itodo H.U. // Life Sci. J. 2010. V. 7. № 4. P. 31. https://doi.org/10.7537/marslsj070410.05
  33. Hsieh C.-T., Teng H. // J. Chem. Technol. Biotechnоl. 2000. V. 75. № 11. Р. 1066. https://doi.org/10.1002/1097-4660(200011)75:11<1066:: aid-jctb321>3.0.co;2-z
  34. Зеленцов В.И., Дацко Т.Я. // ЭОМ. 2012. Т. 48. № 6. С. 65.
  35. Salehi R., Dadashian F., Ekrami E. // J. Photochem. Photobiol. B. 2018. V. 11. Р. 9. https://doi.org/10.1016/j.jphotobiol.2016.10.012
  36. Швыдко А.В., Тимофеева М.Н., Симонов П.А. // Сорбционные и хроматографические процессы. 2021. Т. 21. № 1. С. 42. https://doi.org/10.17308/sorpchrom.2021.21/3218
  37. Almalike L.B. // Int. J. Adv. Res. Chem. Sci. 2017. V. 4. № 5. P. 9. https://doi.org/10.20431/2349–0403.0405002
  38. Johnson R.D., Arnold F.H. // Biochim. Biophys. Acta. 1995. V. 1247. № 2. Р. 293. https://doi.org/10.1016/0167-4838(95)00006-g
  39. Jakubov T.S., Mainwaring. D.E. // J. Colloid. Interface Sci. 2002. V. 252. № 2. P. 263. https://doi.org/10.1006/jcis.2002.8498
  40. Wu K., Wang Y., Hwu W. // Polym. Degrad. Stab. 2003. V. 79. № 2. P. 195. https://doi.org/10.1016/s0141-3910(02)00261-6
  41. Hasanzadeh R., Moghadam P.N., Bahri-Laleh N., Zare E.N. // Int. J. Polym. Sci. 2016. Article ID2610541. https://doi.org/10.1155/2016/2610541
  42. Liu C., Bai R., Ly Q.S. // Water Res. 2008. V. 42. № 6–7. P. 1511. https://doi.org/10.1016/j.watres.2007.10.031

补充文件

附件文件
动作
1. JATS XML
下载

版权所有 © Russian Academy of Sciences, 2025