The Impact of Water on Polylactide – Polybutylene Adipinate Terephthalate Blends

Capa

Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Acesso é pago ou somente para assinantes

Resumo

Mixing in the melt followed by pressing, blends of polylactide — polybutylene adipate terephthalate of various compositions were obtained. The content of polybutylene adipate terephthalate in blends was 10, 20 and 30 wt. %. The effect of water on film samples at a temperature of 22 ± 2°C for 270 days was studied. After exposure to water, a change in morphology was detected: turbidity of the samples and the appearance of defects. The thermophysical characteristics before and after hydrolytic degradation were determined by differential scanning calorimetry. A decrease in the cold crystallization temperature in pure polylactide and with a low content of polybutylene adipate terephthalate, and the disappearance of the cold crystallization peak at a content of 20 and 30 wt. % of polybutylene adipate terephthalate were shown. The degree of crystallinity of polylactide after exposure to water tended to increase. Changes in the chemical structure of mixed samples were monitored by IR spectroscopy.

Texto integral

Acesso é fechado

Sobre autores

L. Selezneva

Emanuel Institute of Biochemical Physics, Russian Academy of Sciences; Plekhanov Russian University of Economics

Autor responsável pela correspondência
Email: mariapdz@mail.ru
Rússia, Moscow; Moscow

M. Podzorova

Emanuel Institute of Biochemical Physics, Russian Academy of Sciences; Plekhanov Russian University of Economics

Email: mariapdz@mail.ru
Rússia, Moscow; Moscow

Yu. Tertyshnaya

Emanuel Institute of Biochemical Physics, Russian Academy of Sciences; Plekhanov Russian University of Economics

Email: mariapdz@mail.ru
Rússia, Moscow; Moscow

R. Romanov

Plekhanov Russian University of Economics

Email: mariapdz@mail.ru
Rússia, Moscow

A. Popov

Emanuel Institute of Biochemical Physics, Russian Academy of Sciences; Plekhanov Russian University of Economics

Email: mariapdz@mail.ru
Rússia, Moscow; Moscow

Bibliografia

  1. Tertyshnaya Y.V., Podzorova M.V. // 2021. V. 94(5). P. 639–646; https://doi.org/10.1134/S1070427221050128
  2. Zhou Q., Xanthos M. // Polym. Eng. Sci. 2010. V. 50. № 2. P. 320e330; https://doi.org/10.1002/pen.21520
  3. Tertyshnaya Y.V., Podzorova M.V., Khramkova A. // Russ. J. Phys. Chem B. 2023. V. 17(1). P. 163–170; https://doi.org/10.1134/S1990793123010098
  4. Olewnik-Kruszkowska E. // Polym. Degrad. Stab. 2016. V. 129. P. 87; https://doi.org/10.1016/j.polymdegradstab.2016.04.009
  5. Scaff aro R., Lopresti F., Botta L. // Eur. Polym. J. 2017. Vol. 96. P. 266; https://doi.org/10.1016/j.eurpolymj.2017.09.016
  6. Elsawya M.A., Kimc K.-H., Parkc J.-W., Deepb A. // Renew.Sust. Energ. Rev. 2017. V. 79. P. 1346; https://doi.org/10.1016/j.rser.2017.05.143
  7. Rapacz-Kmita A., Stodolak-Zych E., Szaraniec B., Gajek M., Dudek P. // Mater. Lett. 2015. V. 146. P. 73; https://doi.org/10.1515/adms-2016-0002
  8. Karpova S.G., Tertyshnaya Y.V., Podzorova M.V., Popov A.A. // Polym Sci Ser A. 2021. V. 63. P. 515;
  9. Varyan I.A., Kolesnikova N.N., Popov A.A. // Russ. J. Phys. Chem В. 2021. V. 15(6). P. 1041–1045; https://doi.org/10.1134/S1990793121060257
  10. Kij chavengkul T., Auras R., Rubino M. et al. // Polym. Degrad. Stab. 2010. V. 95. P. 2641; https://doi.org/10.1016/j.polymdegradstab.2010.07.018
  11. Zhang M., Jia H., Weng Y., Lia C. // Int. Biodeterior Biodegradation. 2019. V. 145. P. 104817; https://doi.org/10.1016/j.ibiod.2019.104817
  12. Nofar M., Heuzey M.C., Carreau P.J., Kamal M.R., Randall J. // J. Rheol. 2016. V. 60. P. 637; https://doi.org/10.1122/1.4953446
  13. Jian J., Xiangbin Z., Xianbo H. // Adv. Ind. Eng. Polym. Res. 2020. V. 3. № 1. P. 19; 10.1016/j.aiepr.2020.01.001' target='_blank'>https://doi: 10.1016/j.aiepr.2020.01.001
  14. Meaurio E., Zuza E., Sarasua J.R. // Macromolecules 2005. V. 38. № 22. P. 9221; https://doi.org/10.1021/ma051591m
  15. Kumara P.H.S., Nagasawa N., Yagi T., Tamada M. // J. Appl. Polym. Sci. 2008. V. 109. № 5. P. 3321; https://doi.org/10.1002/app.28402
  16. Zhao X., Hu H., Wang X. et al. // RSC Adv. 2020. V. 10. № 22. P. 13316; https://doi.org/10.1039/D0RA01801E
  17. Boudaoud N., Benali S., Mincheva R. et al. // Polym Int. 2018. V. 67. № 10. P. 1393; https://doi.org/10.1002/pi.5659
  18. Hocker S.J., Kim W.T., Schniepp H.C., Kranbuehl D.E. // Polymer. 2018. V. 158. P. 72; https://doi.org/10.1016/j.polymer.2018.10.031
  19. Bardin A., Gac P.Y. Le, Cérantola S. et al. // Polym. Degrad. Stab. 2020. V. 171. P. 109002; https://doi.org/10.1016/j.polymdegradstab.2019.109002
  20. Gorassi G., Pantani R. // Adv. Polym. Sci. 2016. P. 119; https://doi.org/10.1007/12_2016_12
  21. Tertyshnaya Y.V., Podzorova M.V., Varyan I.A. et al. // Polymers 2023. V. 15. P. 1029; https://doi.org/10.3390/polym15041029
  22. Kale B.G., Auras R., Singh S.P. // Packag. Technol. Sci. 2007. V. 20. P. 49; https://doi.org/10.1002/pts.742

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML
Baixar
2. Fig. 1. SEM photograph of a sample of PLA90 : PBAT10 film [16].

Baixar (151KB)
Metadados
3. Fig. 2. Photograph of the original PLA and after its exposure in water for 270 days.

Baixar (112KB)
Metadados
4. Fig. 3. Microphotographs of the initial PLA and PLA80 : PBAT20 composition before (a, c) and after 270 days of hydrolysis (b, d).

Baixar (631KB)
Metadados
5. Fig. 4. DSC thermograms of pure PLA samples and compositions PLA90 : PBAT10, PLA80 : PBAT20, PLA70 : PBAT30 (from bottom to top) before (black lines) and after their soaking in water (magenta lines) for 270 days.

Baixar (84KB)
Metadados
6. Fig. 5. Infrared spectra (MNPVO) of the initial PLA (1) and after its soaking in water for 270 days (2).

Baixar (86KB)
Metadados
7. Fig. 6. IR spectra (MNPHE) of the sample of PLA80 : PBAT20 composition - initial (1) and after its soaking in water (2) for 270 days.

Baixar (87KB)
Metadados
8. Fig. 7. IR spectra (MNPHE) of the sample of PLA60 : PBAT40 composition - initial (1) and after its soaking in water (2) for 270 days.

Baixar (94KB)
Metadados

Declaração de direitos autorais © Russian Academy of Sciences, 2024