Magnetic-controlled composite elastomer based on polydimethylsiloxane with a porous structure

A. A. Amirov; Амиров А. А.; A. S. Kaminsky; Каминский А. С.; E. A. Arkhipova; Архипова Е. А.; N. A. Cherkasova; Черкасова Н. А.; A. O. Tovpinets; Товпинец А. О.; V. N. Leucine; Лейцин В. Н.; A. P. Pyatakov; Пятаков А. П.; V. E. Zhivulin; Живулин В. Е.; V. V. Rodionova; Родионова В. В.

doi:10.31857/S0367676523701417

Magnetic-controlled composite elastomer based on polydimethylsiloxane with a porous structure

作者: Amirov A.A.¹, Kaminsky A.S.², Arkhipova E.A.³^,4, Cherkasova N.A.⁵, Tovpinets A.O.¹, Leucine V.N.¹, Pyatakov A.P.², Zhivulin V.E.⁵, Rodionova V.V.¹
隶属关系:
1. Baltic Federal University
2. Lomonosov Moscow State University, Faculty of Physics
3. Peter the Great St. Petersburg Polytechnic University
4. Ioffe Physical-Technical Institute of the Russian Academy of Sciences
5. South Ural State University (National Research University)
期: 卷 87, 编号 6 (2023)
页面: 813-818
栏目: Articles
URL: https://cardiosomatics.ru/0367-6765/article/view/654378
DOI: https://doi.org/10.31857/S0367676523701417
EDN: https://elibrary.ru/VLEOUW
ID: 654378

如何引用文章

全文:

开放存取

##reader.subscriptionAccessGranted##
受限制的访问

订阅存取

详细
作者简介
参考
补充文件
统计

详细

Magnetic elastomers based on polydimethylsiloxane polymer with a filler of barium hexaferrite microparticles with a homogeneous and porous microstructure have been obtained. The microstructure, magnetic and mechanical properties of the obtained samples were studied. The filler leaching method used in the work makes it possible to obtain magnetic elastomers with a porosity of about 58%. It is shown that the porous microstructure leads to a significant decrease in the Young’s modulus of the samples from 0.63 MPa (homogeneous) to 27 kPa (porous) and doesn’t produce any significant changes in the magnetic properties of the sample.

参考

Eduok U., Faye O., Szpunar J. // Progr. Org. Coat. 2017. V. 111. P. 124.
Kolesnikova V.G., Makarova L.A., Omelyanchik A.S. et al. // J. Magn. Magn. Mater. 2022. V. 558. Art. No. 169506.
Степанов Г.В., Крамаренко Е.Ю., Перов Н.С. и др. // Вест. Перм. нац. иссл. политех. ун-та. Механика. 2013. № 4. С. 106.
Li J., Liu X., Crook J.M. et al. // Colloids Surf. B. 2017. V. 159. P. 386.
Dunn K.W., Hall P.N., Khoo C.T.K. // Br. J. Plast. Surg. 1992. V. 45. No. 4. P. 315.
Chen J.S., Liu T.Y., Tsou H.M. et al. // J. Polymer Res. 2017. V. 24. No. 5. P. 1.
Kim Y., Parada G.A., Liu S., Zhao X. // Sci. Robot. 2019. V. 4. No. 33. Art. No. eaax7329.
Xu T., Zhang J., Salehizadeh M. et al. // Sci. Robot. 2019. V. 4. No. 29. Art. No. eaav4494.
Zhao X., Li L., Li B. et al. // J. Mater. Chem. A. 2014. V. 2. No. 43. P. 18281.
Choi S.J., Kwon T.H., Im H. et al. // ACS Appl. Mater. Interfaces. 2011. V. 3. No. 12. P. 4552.
Li J., Liu X., Crook J.M. et al. // Colloids Surf. B. 2017. V. 159. P. 386.
Cha K.J., Kim D.S. // Biomed. Microdevices. 2011. V. 13. No. 5. P. 877.
Duan S., Yang K., Wang Z. et al. // ACS Appl. Mater. Interfaces. 2016. V. 8. No. 3. P. 2187.
Iglio R., Mariani S., Robbiano V. et al. // ACS Appl. Mater. Interfaces. 2018. V. 10. No. 16. P. 13877.
Pullar R.C. // Progr. Mater. Sci. 2012. V. 57. No. 7. P. 1191.
Vinnik D.A., Zherebtsov D.A., Mashkovtseva L.S. et al. // Cryst. Growth Des. 2014. V. 14. No. 11. P. 5834.
Ribeiro C., Costa C.M., Correia D.M. et al. // Nature Protocols. 2018. V. 13. No. 4. P. 681.
González-Rivera J., Iglio R., Barillaro G. et al. // Polymers. 2018. V. 10. No. 6. P. 616.