Quality control of monolithic concrete placement in a structure with a non-removable steel-fiber concrete formwork

封面

如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅或者付费存取

详细

Currently, permanent formwork made of high-strength steel fiber concrete (hereinafter SFB) is used in the construction of structures of nuclear power plants (hereinafter NPP). The use of reinforced formwork blocks with permanent formwork from SFB makes it possible to implement a precast-monolithic construction method, significantly increasing the speed of erection of blocks. At the same time, the use of this technology leads to problems of quality control of the laying of monolithic concrete, where it is hidden inside an armored block with permanent formwork. Experimental studies have been carried out to search for defects of various types and sizes inside the formwork block using the main methods of concrete flaw detection: through ultrasonic sounding, ultrasound tomography, radiography (georadar). Recommendations are given on ways to control the quality of monolithic concrete placement. It has been established that the most suitable method of control is ultrasound tomography, which allows to identify a defect behind a permanent steel-reinforced concrete formwork.

全文:

受限制的访问

作者简介

D. Korotkikh

Joint Stock Company “Institute Orgenergostroy”; National Research Moscow State University of Civil Engineering

编辑信件的主要联系方式.
Email: mail@rifsm.ru

Doctor of Sciences (Engineering), Professor

俄罗斯联邦, build. 10, 7, Derbenevskaya embankment, Moscow, 115114; 26, Yaroslavskoe Highway, Moscow, 129337

V. Dorf

Joint Stock Company “Institute Orgenergostroy”

Email: mail@rifsm.ru

Candidate of Sciences (Engineering)

俄罗斯联邦, build. 10, 7, Derbenevskaya embankment, Moscow, 115114

D. Kapustin

Joint Stock Company “Institute Orgenergostroy”; National Research Moscow State University of Civil Engineering

Email: mail@rifsm.ru

Candidate of Sciences (Engineering)

俄罗斯联邦, build. 10, 7, Derbenevskaya embankment, Moscow, 115114; 26, Yaroslavskoe Highway, Moscow, 129337

L. Zeid Kilani

Joint Stock Company “Institute Orgenergostroy”; National Research Moscow State University of Civil Engineering

Email: mail@rifsm.ru

Engineer 

俄罗斯联邦, build. 10, 7, Derbenevskaya embankment, Moscow, 115114; 26, Yaroslavskoe Highway, Moscow, 129337

参考

  1. Dorf V.A., Krasnovsky R.O., Kapustin D.E. On the way to the implementation of technology for the construction of buildings and structures of nuclear power plants from reinforcement and formwork block with permanent steel-fiber concrete formwork. Information and analytical journal “Stroitel’stvo v atomnoy otrasli”. 2020. No. 1, pp. 47–54. (In Russian).
  2. Kapustin D.E. Strength and deformation characteristics of permanent steel-fiber concrete formwork as a bearing element of reinforced concrete structures. Dis. … Candidate of Sciences (Engineering). Moscow. 2015. 211 p. (In Russian).
  3. Kapustin D., Krasnovsky R., Kiliani L.Z. Stress-strain behavior (SSB) of steel fiber concrete. American Concrete Institute. ACI Special Publication. Vol. 326. Moscow, 06–07 June 2018.
  4. AP1000 Design Control Document (rev. 18). Tier 2 Chapter 3. Design of Structures, Components, Equip. & Systems – Section 3.8 Design of Category I Structures. «Nuclear Regulatory Commission» (NRC). USA. 206 p. https://www.nrc.gov/docs/ML1034/ML103480517.pdf
  5. Patent No. 2653211 C2 Russian Federation, IPC E07B 1/16, E04B 4/16. Sposob podgotovki k kontrolu kachestva monolitnogo betona v sborno-monolitnykh stenakh s elementami nesemnoi zhelezobetonnoi opalubki [Method for preparing quality control of monolithic concrete in prefabricated monolithic walls with elements of non-removable reinforced concrete formwork]: No. 2016131754. Declared 1.08.2016. Published 07.05.2018. N.I. Fomin; Applicant Federal State-owned Autonomous Institution of Higher Education “Ural Federal University named after the first President of Russia B.N. Yeltsin”. (In Russian).
  6. Mochko A., Mochko M., Andreev V.I. Verification the quality of concrete in existing structures. Technologies of European standards. Vestnik MGSU. 2019. Vol. 14. No. 8, pp. 967–975. (In Russian). https://doi.org/10.22227/1997-0935.2019.8.967-975
  7. Patent No. 2572103 C1 Russian Federation, IPC G01N 29/07, E04G 9/00. Sposob kontrolya ukladki betonnoi smesi [Method for controlling the placement of concrete mix]: No. 2014125887/03. Declared 26.06.2014. Published 27.12.2015. V.A. Dorf, R.O. Krasnovsky, D.E. Kapustin, R.R. Nuriev. Applicant Closed Joint Stock Company “Institute “Orgenergostroy”. (In Russian).
  8. Pivovarov V. A. Metrological support of concrete flaw detection. Al’manakh sovremennoi metrologii. 2022. No. 4 (32), pp. 59–67. (In Russian). EDN: WXNFKP
  9. Zhussupbekov A., Iwasaki Y., Eun Chul Shin, Shakirova N. Control and quality of piles by non-destructive express methods: low strain method and cross-hole sonic logging. International Journal for Computational Civil and Structural Engineering. 2019. Vol. 15. No. 1, pp. 171–180. https:// doi.org/10.22337/2587-9618-2019-15-1-171-180
  10. Zerkal’ E.O., Kalashnikov A.Yu., Lapshinov A.E., Tyutyunkov A.I. Identification of internal defects of concreting in the body of a monolithic foundation plate according to the data of a georadiolocation survey. Vestnik MGSU. 2020. Vol. 15. No. 7, pp. 980–987. EDN: TLTHRM. https:// doi.org/10.22227/1997-0935.2020.7.980-987
  11. Wendrich A., Trela C., Krause M., Maierhofer C., Effner U., Wöstmann J. Location of voids in masonry structures by using radar and ultrasonic traveltime tomography. ECNDT. 2006. Tu.3.2.5. 11 p. https://www.ndt.net/article/ecndt2006/doc/Tu.3.2.5.pdf
  12. Kapustin V.V., Khmelnitsky A.Yu., Bakaykin D.V. On the possibility of using inhomogeneous electromagnetic waves for the study of foundation structures. Vestnik of the Moscow University. Series 4: Geology. 2011. No. 4, pp. 52–55. EDN: NXQUED
  13. Lapshinov A.E., Kalashnikov A.Yu. Inspection of the technical condition of the foundation plate reinforced with glass composite reinforcement using georadar. Inspection of buildings and structures: problems and ways to solve them: IX International Scientific and Practical Conference. 2018. pp. 133–139. (In Russian). EDN: YYXQQP
  14. Shuvalov A.N., Lapshinov A.E., Zheletdinov R.R., Zerkal’ E.O. Comparison of ultrasonic and GPR methods for investigation of reinforced concrete columns. BIO Web Conf. Vol. 107. 2024. https:// doi.org/10.1051/bioconf/202410706016
  15. Sagaidak A.I. Standard for the method of acoustic emission control of concrete and reinforced concrete products and monolithic structures. Beton i zhelezobeton. 2021. No. 3 (605), pp. 19–24. (In Russian). EDN: WGHQQY
  16. Arleninov P.D., Krylov S.B., Kalmakova P.S. A system for monitoring the continuity of concrete of steel-reinforced concrete structures based on the thermal imaging method. Academia. Arkhitektura i stroitel’stvo. 2024. No. 2, pp. 150–156. (In Russian). EDN: OANKRU. https://doi.org/10.22337/2077-9038-2024-2-150-156
  17. Lapshinov A.E. Quality control of reinforcement of reinforced concrete structures by external reinforcement systems made of composite materials. Perspektivnye nauki. 2022. No. 6 (153), pp. 49–53. EDN: JGYKKI

补充文件

附件文件
动作
1. JATS XML
下载
2. Fig. 1. Fragments of formwork blocks

下载 (494KB)
索引源数据
3. Fig. 2. The studied fragments of the formwork blocks: a – defects location scheme; b – fixation of the inserts on the inner surface of the SFRC formwork sheet; D1 – 50×50 mm; D2 – 100×10 mm; D3 – 150×150 mm; D4 – 200×200 mm; D5 – cold seam defect

下载 (687KB)
索引源数据
4. Fig. 3. Ultrasound propagation scheme: a – through thickness measurment; b – measurement with sensor offset; h – thickness of the fragment; И – is the ultrasound transmitter; П – is the ultrasound receiver ; d – is the size of the defect

下载 (493KB)
索引源数据
5. Fig. 4. Results of ultrasound velocity changes in concrete

下载 (102KB)
索引源数据
6. Fig. 5. Ultrasound isospids in 400 mm thick blocks aged: a – 1 day; b – 28 days

下载 (2MB)
索引源数据
7. Fig. 6. Ultrasound isospids in 800 mm thick blocks aged: a – 1 day; b – 28 days

下载 (736KB)
索引源数据
8. Fig. 7. Ultrasound scans: 1 – reinforcing bar; 2 – a defect of 5 cm in size; 3 – a defect of 20 cm in size; 4 – a section of formwork detachment

下载 (506KB)
索引源数据
9. Fig. 8. Results of GPR measurments: a – radiogram; b – scan profile

下载 (631KB)
索引源数据

版权所有 © ООО РИФ "СТРОЙМАТЕРИАЛЫ", 2024