| Issue |
Title |
File |
| Vol 126, No 7 (2025) |
ON THE POSSIBILITY OF CREATING HEAT-RESISTANT ALUMINUM DEFORMABLE ALLOYS BASED ON THE Al–Cu–Mn–Ni SYSTEM WITHOUT THE USE OF HARDENING HEAT TREATMENT |
(Rus)
|
|
Belov N.A., Tsydenov K.A., Cherkasov S.O.
|
| Vol 126, No 4 (2025) |
Study of microstructure, electrical conductivity and mechanical properties of ingot and thin wires made of new alloy Al–0.27Zr–0.17Si–0.30Er |
(Rus)
|
|
Komelkov A.V., Nokhrin A.V., Bobrov A.A., Sysoev A.N., Shishulin E.O., Morozkina E.O.
|
| Vol 126, No 4 (2025) |
Study of mechanical properties and corrosion resistance of ultrafine-grained austenitic chromium-nickel steel produced by rotary swaging |
(Rus)
|
|
Zotov D.A., Kopylov V.I., Chegurov M.K., Nokhrin A.V., Sysoev A.N., Chuvil’deev V.N., Kotkov D.N.
|
| Vol 126, No 4 (2025) |
Assessment of plasticity and damage of material of fuel element shells irradiated with fast neutrons |
(Rus)
|
|
Karagergi R.P., Portnykh I.A., Konovalov A.V., Baranova S.V., Kozlov A.V.
|
| Vol 126, No 3 (2025) |
Nitriding of the iron-titanium phase: first-principles calculations based on experimental data |
(Rus)
|
|
Kistanov A.A., Nazarov A.Y., Korznikova E.A.
|
| Vol 126, No 3 (2025) |
Fine structure of pipe steel X70 after long-term operation |
(Rus)
|
|
Tereshchenko N.A., Yakovleva I.L., Esiev T.S.
|
| Vol 126, No 3 (2025) |
Model of transient creep for a ferritic-martensitic steel based on the modified θ-projection method |
(Rus)
|
|
Kolotovkina А.V., Zborovskii V.G., Leonteva-Smirnova M.V.
|
| Vol 126, No 6 (2025) |
MODEL OF VOID FORMATION ON WEDGE DISCLINATION |
(Rus)
|
|
Perevezentsev V.N., Kirikov S.V., Pupynin A.S.
|
| Vol 126, No 5 (2025) |
Study of the structure and properties of aluminum-matrix composites based on technical aluminum, reinforced with multi-walled carbon nanotubes |
(Rus)
|
|
Shirinkina I.G., Brodova I.G., Astafyev V.V., Tolochko B.P., Kuznetsov V.A., Zhdanok A.A., Korotayeva Z.A., Razorenov S.V., Savinykh A.S., Garkucshin G.V., Shorokhov E.V.
|
| Vol 126, No 1 (2025) |
Study of the influence of acoustic fields on the mechanical and technological properties of titanium VT1-0 |
(Rus)
|
|
Remshev E.Y., Vorob’eva G.A., Olekhver A.I., Abu Fadda T.M.
|
| Vol 126, No 1 (2025) |
The evolution of the microstructure of Cr16–Ni19 Steel under irradiation in the low enrichment zone of a fast neutron reactor. Formation and development of radiation porosity |
(Rus)
|
|
Portnykh I.A., Panchenko V.L., Ustinov A.E., Kozlov A.V.
|
| Vol 126, No 1 (2025) |
The evolution of the microstructure of Cr16–Ni19 steel under irradiation in the low enrichment zone of a fast neutron reactor. The effect of neutron irradiation conditions on the structural and phase state |
(Rus)
|
|
Panchenko V.L., Portnykh I.A., Ustinov A.E.
|
| Vol 126, No 2 (2025) |
Thermal stability of electrical conductivity and mechanical properties of thin wires from aluminum alloys Al–0.25%Zr–(Si, Er, Hf, Nb) |
(Rus)
|
|
Shadrina I.S., Bobrov A.A., Nokhrin A.V., Berendeev N.N., Kopylov V.I., Chuvildeev V.N., Tabachkova N.Y.
|
| Vol 126, No 2 (2025) |
Dislocation structure and an activity of plastic deforming media |
(Rus)
|
|
Zuev L.B., Barannikova S.A., Danilov V.I.
|
| Vol 126, No 2 (2025) |
Deuterium retention in the material of welded seam rafm steel EK-181 (Rusfer) |
(Rus)
|
|
Golubeva A.V., Persianova A.P., Efimov V.S., Bobyr N.P., Chernov V.M.
|
| Vol 125, No 9 (2024) |
Changes in the structure of the Fe–Ni–Ti–C–B composite during hot plastic deformation |
(Rus)
|
|
Pugacheva N.B., Bykova Т.M., Kгyuchkov D.I.
|
| Vol 125, No 8 (2024) |
Crack resistance of maraging steel at cyclic loading |
(Rus)
|
|
Simonov Y.N., Simonov M.Y., Kaletina Y.V., Kaletin A.Y.
|
| Vol 125, No 8 (2024) |
Structural studies and convergence scenario for a shell made of Mg–Zn–Zr magnesium alloy |
(Rus)
|
|
Shirinkina I.G., Brodova I.G., Astafjev V.V., Dolgih S.M., Gaan K.V., Novoselov V.V.
|
| Vol 125, No 12 (2024) |
Effect of equal channel angular pressing on the structure and mechanical properties of Al–6Ca–3Ce alloy |
(Rus)
|
|
Andreev V.A., Barykin M.A., Karelin R.D., Komarov V.S., Naumova E.A., Rogachev S.O., Tabachkova N.Y.
|
| Vol 125, No 12 (2024) |
Effect of mechanical alloying modes on the microstructure, phase composition and mechanical properties of powder high-entropy Co–Cr–Fe–Ni–Ti alloys |
(Rus)
|
|
Berezin М.А., Zaitsev А.А., Romanenko B.Y., Loginov Р.А.
|
| Vol 125, No 12 (2024) |
Investigation of residual stresses in steel plates after shot-impact treatment by high spatial resolution neutron diffraction |
(Rus)
|
|
Karpov I.D., Em V.T., Nikolaeva E.P., Sergeichev I.V., Voloskov B.S., Mikula P.
|
| Vol 125, No 6 (2024) |
Thermal stability of microstructure and properties of ingots and fine wires from Al–Zr alloys |
(Rus)
|
|
Komelkov A.V., Nokhrin A.V., Bobrov A.A., Sysoev A.N.
|
| Vol 125, No 6 (2024) |
Calculation of the yield strength of polycrystalline materials with a hexagonal close-packed lattice at a given texture |
(Rus)
|
|
Kesarev A.G.
|
| Vol 125, No 6 (2024) |
Microstructure of fracture surfaces after radial compression of annular specimens made of cladding austenitic steel exposed to damaging dose above 100 dpa |
(Rus)
|
|
Karagergi R.P., Kozlov A.V., Yarkov V.Y., Pastukhov V.I., Barsanova S.V., Churyumova T.A., Mitrofanova N.M., Leont’eva-Smirnova M.V.
|
| Vol 125, No 11 (2024) |
Effect of Grain Size on the Hydrogen-Induced Ductility Loss of a Multicomponent CoCrFeMnNi Alloy |
(Rus)
|
|
Astafurova E.G., Nifontov A.S.
|
| Vol 125, No 11 (2024) |
Effect of Vanadium Concentration on the Structure and Properties of Ti–V Alloys Subjected to High-Pressure Torsion |
(Rus)
|
|
Davdian G.S., Gornakova A.S., Straumal B.B., Orlov V.I., Afonikova N.S., Tyurin A.I., Druzhinin A.V., Kilmametov A., Sommadossi S.
|
| Vol 125, No 11 (2024) |
Thermophysical Properties of High-Strength Low-Alloyed Pipe Steel |
(Rus)
|
|
Urtsev N.V., Platov S.I., Shmakov A.V., Ryzhkov M.A., Lobanov M.L.
|
| Vol 125, No 11 (2024) |
A multiscale model of creep in steels with account for the microstructure |
(Rus)
|
|
Khromov K.Y., Ryabov V.A., Kozlov A.V., Panchenko V.L.
|
| Vol 125, No 5 (2024) |
The effect of vanadium on the performance properties of Al–2.3%V alloy manufactured by 3D printing |
(Rus)
|
|
Shevchenko V.G., Eselevich D.A., Popov N.А., Baklanov M.N., Vichuzhanin D.I.
|
| Vol 125, No 3 (2024) |
Fatigue Resistance of the Sheets of Heat-Resistant Titanium Alloys |
(Rus)
|
|
Kalienko M.S., Popov A.A., Volkov A.V., Leder M.O., Zhelnina A.V.
|
| Vol 125, No 2 (2024) |
Initiation of the Shape Memory Effect by Fast Neutron Irradiation |
(Rus)
|
|
Bobrovskii V.I., Afanasyev S.V., Voronin V.I., Kazantsev V.A., Kataeva N.V., Parkhomenko V.D., Proskurnina N.V., Sagaradze V.V.
|
| Vol 125, No 2 (2024) |
Investigation of the absorption properties of multilayer composites based on ABS-plastic with boron nitride |
(Rus)
|
|
Kovalenko N.A., Tarnavich V.V., Chetverikov Y.O.
|
| Vol 125, No 7 (2024) |
Microstructural, mechanical, and tribological characteristics of ceramic reinforced Al/Cu hybrid matrix composites |
(Rus)
|
|
Kaya E., Birgin P.T.
|
| Vol 124, No 12 (2023) |
The Dynamic Properties of Low-Alloyed Copper Alloys with a Submicrocrystalline Structure Obtained by High-Strain-Rate Deformation |
(Rus)
|
|
Abdullina D.N., Khomskaya I.V., Razorenov S.V., Shorokhov E.V.
|
| Vol 124, No 12 (2023) |
Structure, Phase Composition and Mechanical Properties of a High-Strength Steel with Transition Carbide η-Fe2C |
(Rus)
|
|
Borisova Y.I., Mishnev R.V., Tkachev E.S., Kniaziuk T.V., Gaidar S.M., Kaibyshev R.O.
|
| Vol 124, No 12 (2023) |
Mechanical Properties of High Entropy Alloys Based on Rare Earth Elements with Yttrium and Scandium |
(Rus)
|
|
Sipatov I.S., Korolev O.A., Ignatieva E.V., Marshuk L.A., Gelchinskiy B.R., Rempel A.A.
|
| Vol 124, No 9 (2023) |
STUDY OF LOW-TEMPERATURE THERMOMECHANICAL BEHAVIOR OF THE Ti-18Zr-15Nb SUPERELASTIC ALLOY UNDER DIFFERENT TEMPERATURE-RATE CONDITIONS |
(Rus)
|
|
Derkach M.A., Sheremetev V.A., Korotitskiy A.V., Prokoshkin S.D.
|
| Vol 124, No 9 (2023) |
The influence of Ni on the contributions of the superplastic deformation mechanisms of the Al–Zn–Mg–Cr alloys |
(Rus)
|
|
Yakovtseva O.A., Postnikova M.N., Irzhak A.V., Rofman O.V., Mikhaylovskaya A.V.
|
| Vol 124, No 8 (2023) |
Evolution of structure and mechanical properties at high temperature tempering of medium carbon microalloyed steel |
(Rus)
|
|
Farber V.M., Khotinov V.A., Selivanova O.V., Ovsyannikov A.B., Karabanalov M.S.
|
| Vol 124, No 8 (2023) |
On the nucleation of cracks near stress sources with weak singularities |
(Rus)
|
|
Kirikov S.V., Perevezentsev V.N., Pupynin A.S.
|
| Vol 124, No 8 (2023) |
MANIFESTATION OF SUPERPLASTICITY AT LOWER TEMPERATURES OF 1565CH ALLOY OF THE Al−Mg SYSTEM IN ULTRAFINE-GRAIN AND NANOSTRUCTURAL STATES |
(Rus)
|
|
Bobruk E.V., Ramazanov I.A., Astanin V.V., Zaripov N.G., Kazykhanov V.U., Drits A.M., Murashkin M.Y., Enikeev N.A.
|
| Vol 124, No 7 (2023) |
Peculiarities of the Behavior of Point Defects under the Optoplastic Effect in Copper |
(Rus)
|
|
Malinskii T.V., Rogalin V.E., Shur V.Y., Kuznetsov D.K.
|
| Vol 124, No 7 (2023) |
Structural Evolution of 10% Cr–3% Co Steel Microalloyed
with Re and Cu during Creep Au 923 К |
(Rus)
|
|
Fedoseeva A.E.
|
| Vol 124, No 6 (2023) |
Evolution of the structure, texture and mechanical properties of a cold-swaged austenitic stainless steel during post-deformation annealing |
(Rus)
|
|
Chernichenko R.S., Panov D.O., Naumov S.V., Kudryavtsev E.A., Mirontsov V.V., Salishchev G.A., Pertsev A.S.
|
| Vol 124, No 6 (2023) |
STRUCTURE AND PROPERTIES OF THE Al-Zn-Mg-Cu-Zr-Y(Er) ALLOYS SHEETS DOPED BY MANGANESE |
(Rus)
|
|
Glavatskikh M.V., Barkov R.Y., Khomutov M.G., Pozdniakov A.V.
|
| Vol 124, No 6 (2023) |
THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE Al–Mg–Fe–Ni–Zr–Sc ALLOY AFTER MULTIDIRECTIONAL FORGING |
(Rus)
|
|
Kishchik A.A., Aksenov S.A., Kishchik M.S., Demin D.O., Churyumiv A.Y., Mikhaylovskaya A.V.
|
| Vol 124, No 6 (2023) |
EFFECT OF HIGH PRESSURE TORSION ON STRUCTURE AND MECHANICAL PROPERTIES OF Al–Ca–Cu ALLOY |
(Rus)
|
|
Rogachev S.O., Naumova E.A., Tabachkova N.Y., Ten D.V., Sundeev R.V., Zadorozhny M.Y.
|
| Vol 124, No 5 (2023) |
On the Precipitation of the -Phase {111} Al Plates
in the Al–Cu–Mg Alloy |
(Rus)
|
|
Zuiko I.S., Gazizov M.R., Kaibyshev R.O.
|
| Vol 124, No 5 (2023) |
The Effect of Termomechanical Treatment
on the Low-Cyclic Fatigue Behavior in an Al–Cu–Mg–Ag Alloy |
(Rus)
|
|
Gazizov M.R., Gazizova M.Y., Zuiko I.S., Kaibyshev R.O.
|
| Vol 124, No 5 (2023) |
A Study of Residual Stresses in Steel Plates Obtained
by Laser Deposition Directly on a Rigid Substrate |
(Rus)
|
|
Rylov S.A., Ivanov S.Y., Zemlyakov E.V., Babkin K.D., Karpov I.D., Em V.T.
|
| Vol 124, No 4 (2023) |
The Effect of Atomic Interdiffusion at the Al/Сu Interface
in an Al/Сu Composite on Its Mechanical Properties:
Molecular Dynamics |
(Rus)
|
|
Polyakova P.V., Baimova Y.A.
|
| Vol 124, No 4 (2023) |
Formation of Deformation Bands during Impact Indentation
of an Al–6Mg Alloy |
(Rus)
|
|
Shibkov A.A., Zolotov A.E., Denisov A.A., Gasanov M.F.
|
| Vol 124, No 4 (2023) |
The Effect of TiN Nanoparticles on the Structure and Mechanical Properties of the Porous–Solid Steel Joint Formed
by Laser-Beam Welding |
(Rus)
|
|
Cherepanov A.N., Drozdov V.O., Filippov A.A.
|
| Vol 124, No 4 (2023) |
The Effect of Thermodeformation Treatment on the Structure
and Strengthening of the Al–7.1% Zn–2.8% Mg–1.4% Ni–1.1% Fe
Alloy Produced via Casting in an Electromagnetic Crystallizer |
(Rus)
|
|
Belov N.A., Timofeev V.N., Cherkasov S.O., Motkov M.M., Musin A.F.
|
| Vol 124, No 4 (2023) |
Predicting the Concentration Dependence of the Surface Tension
of Ternary Systems |
(Rus)
|
|
Dadashev R.K., Elimkhanov D.Z., Khazbulatov Z.L.
|
| Vol 124, No 3 (2023) |
A Study of the Neutron Absorbing Properties of Al + B4C
and Al + B Coatings Formed by Cold Gas-Dynamic Spraying |
(Rus)
|
|
Kosarev V.F., Klinkov S.V., Shikalov V.S., Chesnokov A.E.
|
| Vol 124, No 3 (2023) |
Simulation of Rolling in a Magnetostriction Fe–Ga Alloy |
(Rus)
|
|
Milyutin V.A., Nepriakhin S.O., Gervasyeva I.V.
|
| Vol 124, No 3 (2023) |
The Influence of Production Technology on the Structure
and Mechanical Properties of Niobium–Silicon–Aluminum Alloys |
(Rus)
|
|
Sapegina I.V., Lubnin A.N., Ladyanov V.I.
|
| Vol 124, No 2 (2023) |
Comparative Сharacteristics of the Structure
and Functional Properties of Coatings Formed on Aluminum Alloys
2ххх and 7ххх Series by the Method of Plasma Electrolytic Oxidation |
(Rus)
|
|
Letyagin N.V., Sokorev A.A., Kokarev V.N., Shatrov A.S., Tsydenov A.G., Finogeev A.S., Musin A.F., Petrzhik M.I.
|
| 1 - 59 of 59 Items |
|
